Kofax Communication Server 10.0.0 User Manual
Page 25
Environment Guide
Version 10.00.00
© Copyright Kofax. All information is subject to change without notice.
25
1. Processor utilization (%)
2. Memory usage
3. Disk throughput (kBytes/sec, IOPS)
4. Network throughput (kBytes/sec)
If the performance data should be collected by the Windows Performance Monitor, start it locally or on any
other Windows computer in the network (in latter case you will have to specify an appropriate user with
admin rights on the computer being monitored) and setup logging for following performance objects:
Double-check whether disk performance counters have been activated (they are not active by default) by
command
Diskperf –Y <Enter>
After the measurement has been finished, consider especially following counters:
1.
a.) Number of processors (n)
b.) Processor(s) total utilization in % (u)
along with information on CPU model and frequency (f) (e.g., Pentium IV 1500MHz)
c.) Processor(s) bandwidth in MHz (if already running in the VM)
Evaluation: Calculate estimated CPU bandwidth in MHz for the ESX server based on processor
utilization u in % on the physical system:
CPUMHz = (n * f * u)/100