Installing indicius, Standard installation, Custom module registration – Kofax INDICIUS 6.1 User Manual
Page 28
Chapter 4
18
Installation Guide
Installing INDICIUS
Standard Installation
To install INDICIUS
1
Place the INDICIUS installation CD into the CD-ROM drive.
The main installation screen will display.
2
Select INDICIUS and follow the on-screen instructions.
3
To install Document Review, select INDICIUS Document Review and follow
the on-screen instructions.
4
To install Transformation Studio, select Transformation Studio and follow
the on-screen instructions.
Custom Module Registration
During installation the INDICIUS modules will be automatically registered as Kofax
Capture custom modules. If automatic registration has not been successful an error
will be displayed and the INDICIUS modules should be registered manually.
To register the INDICIUS modules manually
1
Start Administration by clicking Start on the taskbar to display the menu,
and selecting:
All Programs | Kofax Capture 8.0 | Administration.
2
Select Tools | Custom Module Manager to open the Custom Module
Manager window.
3
Click Add to open a file selection window and select the following file:
<Kofax Capture Installation Path>\bin\indicius55.acm.
A Custom Module dialog will appear listing the available modules.
4
Select all INDICIUS modules and click Install.
When registration of each module is complete a window will display.
5
Click OK in each case
6
Click Close on the Custom Module window.
The modules are now displayed in the Custom Module Manager window.