Chicago Electric Power Tools 7" Angle grinder 67648 - Manual (Page 12)

Page 12 For technical questions, please call 1-800-444-3353. SKU 67648
SpeciFicAtiOnS
Electrical Input 120 V~ / 60 Hz / 11 A
Motor No Load Speed 7,800 RPM
Max. Accessory
Diameter
7”
Arbor Hole Diameter 7/8”
Spindle Thread 5/8” x 11 TPI
e194601
95gA
This angle grinder can be used for
grinding steel, stone or ceramic
workpieces such as pipe, iron steel
bar, household bricks and tiles. Do not
attempt to grind wood or a soft metal
such as lead. The material will quickly fill
the disc and render it useless.
unpAcKing
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.
components
Figure 1
Spanner (53)
Wheel Guard (3)
Lock-on
Switch (46)
Trigger
(47)
Hex Wrench
(55)
Auxiliary Handle (23)
Handle
(43)
Carbon Brush
Cap (41)
Spindle Lock
Button (21)
Grinding Wheel
(Sold Separately)
inStructiOnS FOr putting
intO uSe
read the entire iMpOrtAnt
SAFetY inFOrMAtiOn
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
tO preVent
SeriOuS injurY
FrOM AccidentAl
OperAtiOn:
turn the power Switch of the tool
off and unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.