Cisco BEFCMU10 - Manual (Page 12)

8 Chapter 5: Installing the USB Driver for Windows 2000
Overview
Cable Modem with USB and Ethernet Connections
Chapter 5: Installing the USB Driver for Windows 2000
Overview
If you are connecting the Cable Modem to your computer using the USB port, follow these instructions to install
the USB driver required for Windows 2000.
Instructions for Installing the Driver
1. Power on your computer. Make sure you have administrative rights on your computer; otherwise you cannot
install the driver.
2. Windows 2000 will automatically detect the Cable Modem. Insert the User Guide and USB Drivers CD-ROM
into your computer’s CD-ROM drive.
3. On the Welcome screen of the Found New Hardware Wizard, click the Next button.
4. On the Install Hardware Device Drivers screen, select Search for a suitable driver for my device
(recommended). Then click the Next button.
5. On the Locate Driver Files screen, select CD-ROM drives, and click the Next button.
Figure 5-2: Install Hardware Device Drivers
Figure 5-1: Welcome
Figure 5-3: Locate Driver Files