Cisco BEFCMU10 - Manual (Page 15)

11 Chapter 7: Installing the Driver for Windows 98
Overview
Cable Modem with USB and Ethernet Connections
Chapter 7: Installing the Driver for Windows 98
Overview
If you are connecting the Cable Modem to your computer using the USB port, follow these instructions to install
the USB driver required for Windows 98.
Instructions for Installing the Driver
1. Power on your computer. Make sure you have administrative rights on your computer; otherwise you cannot
install the driver.
2. Windows 98 will automatically detect the Cable Modem. Insert the User Guide and USB Drivers CD-ROM into
your computer’s CD-ROM drive.
3. On the first screen of the Add New Hardware Wizard, click the Next button.
4. Select Search for the best driver for your device (Recommended). Then click the Next button.
5. Select CD-ROM drive. Then click the Next button.
Figure 7-2: Search for Driver
Figure 7-1: Add New Hardware Wizard
Figure 7-3: Select CD-ROM Drive