A&D Weighing FC-500Si - Manual (Page 12)

3. BASIC OPERATIONS
3-1. Basic Operations
Turn The Display ON and OFF
1. Press the STANDBY/OPERATE key to turn the
scale on when displaying the standby indicator.
The display will show all the
display segments first and
show “-------” while the
weighing data becomes stable.
2. The scale will automatically assume zero
(power-on zero) and the display will show zero.
‰ The range for power-on zero is ±10% of the
weighing capacity around the calibrated zero
point.
‰ If there is something more than 10% of the
capacity on the weighing pan, the display will
show “err 1”. Remove everything from the
weighing pan or press the
RESET key.
When you press the RESET key, the
power-on zero doesn’t work.
3. Press the STANDBY/OPERATE key again,
and the scale returns to the standby mode.
ZERO
‰ The
ZERO key will bring the weight display back to zero as long as the weighing
pan is empty or within 2% of capacity.
1. Remove everything from the weighing pan and press the
ZERO key. Then the
display shows “-------” and waits for the weighing data to become stable.
2. The scale will zero and the ZERO indicator will
come on to indicate that the scale is ready to
start weighing or counting.
‰ There is an automatic zeroing function called
“zero tracking”. The scale initially comes with
this function enabled to take care of normal
zero drift caused by changes in temperature,
humidity, air pressure etc. (F-Function f-04-01).
STABL
      
. 888881 0 881
pcs
 W 2 W E I G H T ( k g )
1234516789 0.000
 2 3 S A M A P U W ( g )
12341567 0.00000 4567890123456
7
ZERO TOTAL M+
TARE
ENTERED
STABL
      
. 8888888 . 881
SCALE
pcs
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
888888888888888888888888888
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
888888888888888888888888888
TARE
ZERO M+ TOTAL ENTERED SCALE
OPERAT
STANDBY
STABL
      
. 888881 0 881
pcs
 W 2 W E I G H T ( k g )
1213456789 0.000
 2 3 A S A M P U W ( g )
12341567 0.00000
ZERO TOTAL M+
TARE
ENTERED SCALE
      
.8888888
      
.-------
Standby indicator
10