AERCO Modulex E8 Controller (and BCM) For Modulex EXT Boilers - Manual (Page 20)

E8 Controller and BCM for Modulex EXT
Installation, Operation & Maintenance Manual
CHAPTER 4: E8 INITIALIZATION AND QUICK START GUIDE
Page 20 of 108 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0093_0A
PRI: 06/24/2013 Phone: 800-526-0288 GF-136-C
4.2 QUICK START INSTRUCTIONS
Below are instructions for setting the most basic settings in the E8 controller, including
maximum and minimum flow temperature, room temperature settings, heat slope, and initiation
of heating programs.
IMPORTANT NOTE!
Before the boiler may be used, the E8 controller MUST be first
intitialized by entering language, year, month, day, and hour in the
Installation Menu as described in Section 4.1.
4.2.1 Setting Maximum and Minimum Flow Temperature
Figure 4-2: E8 Quick Start, Max. & Min. Flow Temperature Settings