ALTANA Color-View - Manual (Page 39)

Chapter 3 OPERATION/MAINTENANCE
47
Figure 3-2 View of Sensor Rear Panel with Operator Controls
Power Module
The AC Power Module is located on the rear panel (see Figure 3-2).
Note the location of the fuse drawer, power switch and power cord
plug in the drawing.
I/O Connector
The I/O Connector on the rear panel of the Sensor Unit is a DB-25
female connector which is connected by a DB25 male/female serial
cable connection to the RS-232C Serial interface on the Host
Computer System (Figure 3-2). This feature is recessed to allow the
sensor to be placed within 25 mm (1 inch) from any hard surface.