Canon DM-GL1 - Manual (Page 47)

47
E
Using the Full Rang
e of Features
Searching and Reviewing While Recording
Record search
REC SEARCH
When the camera is in record pause mode, you can
use record search to play the tape forwards or
backwards to find the point where you want to
start or restart recording. This is useful when you
want to add a new scene to a previously used
cassette. By using record search, you can ensure a
smooth, noise-free join between the new scene and
the old one.
1. Make sure the camera is in record pause
mode.
2. Press and hold the REC SEARCH + or
– button while you check the picture in
the display.
When the camera is in record pause mode, you can use record review to play back the last few seconds of
your recording and then return automatically to record pause mode. You can quickly make sure that a
scene has recorded properly and then go on to shoot the next scene, without producing any noise in the
picture.
1. Make sure the camera is in record pause mode.
2. Press and release the c (record review) button while you check the picture in the
display.
• The camera rewinds the tape, plays back the last few seconds, and returns to record pause mode.
Note:
• Noise may appear on the screen during record search and record review.
Record review
• The + button plays the recording forwards and the – button plays it backwards.
3. Release the button when you find the point where you want to start recording.
• The camera returns to record pause mode.