Canon DM-GL1 - Manual (Page 98)

98
E
Ad
ditional
Inf
ormation
Refer to page 20.
Refer to page 91.
Appears as a warning to
protect the tape and also
when condensation is
detected. Remove the tape
as soon as possible after
the camera has displayed
the caution.
Refer to page 75.
Refer to page 75.
Appears when you try to
do audio dubbing or A/V
insert on a tape recorded in
LP mode. Refer to
page 78, 80.
Appears when you try to
do audio dubbing on a tape
recorded in 16-bit audio or
12-bit, 4-channel mode.
Refer to page 80.
Appears when the camera
detects a blank section of a
tape during audio dubbing
or A/V insert. Refer to
page 78, 80.
SET THE E T IM E, ZON
DATE AND T IME
CHANGE THE BATTERY PACK
TAPE END
E TAPE I S
ER
TH
A
SET FOR
UR S E PRE EN V T ION
CON N DE SAT ION
HAS BEEN DET CTED E
REMOVE THE CAS ETTE S
R
E COPY D PROTECT
CTED
R IGHT
PLAYBACK I S STR I E
R
E COPY D PROTECT
CTED
R IGHT
STR I E DUBB ING
Caution phrases
The camera displays various caution phrases —
they appear for 4 seconds before disappearing.
When you start recording, the camera counts from
0SEC to 10SEC. Shots which are shorter than
10 seconds may be difficult to edit later. On the
other hand, if you are not planning to edit the
recording, remember that a shot which does not
contain action should generally last no longer than
10 seconds.
Time Code
0sec
1 0sec
3 4 : 2 : 1 0 : 5 6
Recording reminder
Appears each time you
turn the power on, until
you set the date and time
(p. 39).
Appears when the battery
pack is exhausted (p. 83).
Appears when the tape has
reached the end.
This records counter information, including hour,
minute, second, and frame number on a special
data code area on the tape itself. It is reset
automatically when a new tape is loaded. In
camera mode, the frame number doesn’t appear in
the display.
E CHEC CASSETT K THE
[ ] LP MODE
E CHEC CASSETT K THE
[ ] AUD IO MODE
E CHEC CASSETT K THE
[ ] BLANK