AvMap Geosat 5 series Manual - Manual (Page 15)

15
4. Setting the destination
4.1 Setting the first destination
In order to insert your first destination:
1. Press the WHERE TO GO Key on the side keyboard to open the Where to go page.
2. Touch the Address button to open the Address page
3. Touch on the New Address button in the
upper right part of the screen
4. The address wizard will start with the Enter
country page. To insert the country, touch the
letters on the virtual keyboard.
5. Touch the green arrow button to go on with
the procedure and access the Enter city page.
If this is not the first time you have entered an
address, the name of the last city entered is
suggested.
6. Enter the city by touching the letters on the
virtual keyboard.
The name of selected country is shown on
the upper bar, and it is possible to go back to
the country selection by touching the Country
button.
7. Once the city has been entered, touch
the green arrow button to go on with the
procedure.
In case there are more cities with the same
name, a list with all the possible results will
be displayed. Touch the desired city on the list
to go on with the procedure and access to the
Enter address page.
8. To insert the name of the street country, touch
the letters on the virtual keyboard. To insert
symbols or numbers touch the 123 button to
open the virtual numeric keyboard then touch
the ABC button to go back to the alphabetic
keyboard.
9. Touch the green arrow button to go on with
the procedure and access to the Enter House
number page.
Insert a number and touch the green arrow
button. In case the selected House number is
not found, a list with all the available numbers’
ranges for the selected street will be displayed.
Choose the nearest house number.
10. The Start Navigation page will be displayed.
Touch the Go button to calculate the route