AvMap Geosat 5 series Manual - Manual (Page 39)

3
signal. It should also display the ‘Found New Hardware’ message. Confirm the installation
3. Open the downloaded file. This will launch the Software update utility and your AvMap Geosat
will emit two audible signals and will display the current version of the software and the new
one.
Choose one (or more) languages from the menu and click on ‘TRANSFER’. Once you have
completed the update click on ‘EXIT’ and wait for the audible signal to disconnect your AvMap
Geosat 5 from the PC.
Minimum PC requirements for Geosend
Microsoft ® Windows®
ME / 2000 / XP o 2003 Server.
Processor 486 DX2
64 Mb RAM
64 Mb free space on Hard Disc
256 colours (800*600 resolution)
USB port
11.2 Updating the Map
To update the map of Geosat 5 visit www.avmap.it for the list of available maps.
To know whether your cartography needs to be updated or not, you need to know the version of
the cartography preloaded on the SD card and check whether that is the latest one available on the
AvMap web site.
To check your cartography version:
1. Press the MENU key
2. Touch the Settings button twice
3. Touch the System info button
This contains all the info related to software and cartography. The cartography version is detailed in
the bottom: Map Name and Version (V.x) e.g. Italy V.4
The next step is to verify whether there is a newer version available on www.avmap.it . Check in the
Cartography section or in the Shop on line.