AvMap Geosat 5 series Manual - Manual (Page 35)

35
Power Status
The icon shows the status of the battery
10.1.6 Simulation settings
Simulation: On / Off
It enables or disables the simulation
Speed: you can use the dimmer to set the average speed for the simulation.
10.1.7 Alarm
Safety Camera Alarm: On / Off
It activates the proximity alarm when approaching a speed camera (for further info read par. 9.3).
The alarm radius determines the distance at which the alarm is activated.
Contact Alarm: On / Off
It activates the proximity alarm when approaching a Contact associated with the proximity alarm
icon.
Speed alarm:
You can use the dimmer to set the maximum speed above which the alarm is activated.
10.1.8 Reset
Clear recent: it deletes the recently found addresses in memory
Reset default options: it restores the default settings.
10.2 Map settings
Map Details
• Simple
• Full
• Normal
Vision 3D / 2D
It sets the map view in 2D or 3D (bird view).
Map Direction
• North: the 2D map stays fixed with the north
up.
• Direction: the map rotates so that the vehicle
direction is always facing up.
Turn details: On / Off
With this option checked, the screen freezes to show the detail of the forthcoming manoeuvre. The
turn details are set as off by default.
Auto Zoom
• Off: the zoom stays constant and has to be changed manually.