AvMap Geosat 5 series Manual - Manual (Page 23)

23
perspective. This map mode can be used only
with active navigation (with valid GPS fix). When
the 3D mode is used, and you touch the map,
the map is displayed in 2D mode so that you can
better explore it. After this operation the map
goes back to 3D mode.
6.4 Night vision
With Geosat 5 it is possible to set the night
vision for a safer driving at night. With the night
vision, the colour palette is changed so that the
new menu and cartography are readable but not
disturbing in absence of light. To switch to the
auto night vision:
1. Press the MENU key
2. Touch the Night Vision button.
Or:
1. Press the POWER key to open the Display
Options menu
2. Touch the arrow to go to the second page
3. Touch the night vision check box
In the same page you can vary the level of
brightness or set the Auto brightness control,
so that the brightness varies according to the
environmental light perceived by the sensor
positioned on the back of Geosat 5.
6.5 Turn List
To display the list of all the manoeuvres to be
performed:
1. Press the Route Functions key
2. Touch the Turn List button. In this page the
list of all the manoeuvres to be performed are
displayed.
6.6 Points of interest (POI)
The database of the points of interests is very
useful when you are in an unfamiliar place. This
information is preloaded in the Geosat 5 memory card, together with the cartographic data. The
POI list includes hotels, restaurants, hospitals, police stations, cinemas etc and are grouped in these
categories:
• Car services
• Transports