AvMap Geosat 5 series Manual - Manual (Page 21)

21
In the lower part of the screen the information bar is displayed.
The information bar displays the name of the street you are travelling along, and above that, the
name of the street you will have to turn into.
The left corner of the information bar shows the distance to the next manoeuvre and the icon of the
manoeuvre you will have to perform.
When the navigation is not active, touch any point on the map to see the information about the
selected point displayed in the information bar.
On the left part of the screen there are three info
boxes showing: Time to destination, time to the
next manoeuvre and distance to destination. This
info can be customised. If the navigation is not
active the info boxes are hidden.
6.1.1 Unit Status
Touch the status bar in the lower right corner of
the screen to open the Unit status page. This
page includes three big buttons: GPS, TMC and
Battery.
GPS
The GPS info page contains info on the position
and strength of the signal received from the
satellites. The displayed info includes:
• GPS status
• Latitude/Longitude
• Course
• Speed
• Date & Time
• Altitude
The reiniz. GPS allows restarting the GPS
receiver.
TMC
The Traffic Info page displays info on the status
of the TMC receiver.
POWER
The Power page displays information on the
battery status and on the power save options.
6.1.2 Data box
If you are in active navigation mode, on the
left side of the screen three data boxes are
TMC status