Canon L240 - Manual (Page 160)

13-6 Troubleshooting Chapter 13
Fixing assembly area:
Top edge of the jammed paper in the
fixing assembly:
Push the jammed paper back
=, then pull
it carefully towards you to remove it >.
Top edge of the jammed paper has
passed through the fixing assembly:
Pass the jammed paper under the roller.
Use both hands to carefully pull out the
jammed paper.
• Do this carefully to prevent tearing
the jammed paper. If you do tear it,
be sure to remove any torn pieces
from the unit since these will cause
paper to jam again.
2
2
1
DO NOT TOUCH THE
FIXING ASSEMBLY
Caution
The fixing assembly becomes
extremely hot when the unit is in
use. Be very careful not to touch it
so as to avoid injury.