Attaching the handset to your fax – Canon L240 User Manual

Page 203

Advertising
background image

C-3

Options

Appendix C

Op

ti

o

n

s

Attaching the Handset to Your FAX

Follow this procedure to attach the handset to your FAX:

1

Use a screwdriver to remove the two
covers on the left side of the unit.

2

Remove the screws from the plugs and
insert the plugs into the holes on the
handset cradle.

3

Insert the plugs (with the handset
cradle) into the holes on the unit.

If you have difficulty inserting the
plugs, turn the unit so that the left
side is facing you and the right side
is against a wall. You can now
insert the plugs without the unit
moving.

4

Use your finger to push the screws
into the plugs.

If you have difficulty, use a cross-
point screwdriver to push the
screws all the way into the plugs.
(Do not screw them in as the
screws may break.)

Make sure you support the unit
when inserting the screws.

5

Place the handset in its cradle and
connect the handset cord to the

D jack.

Advertising
This manual is related to the following products: