Canon L240 - Manual (Page 179)

14-3 Summary of Settings Chapter 14
Su
m
m
ar
y o
f
S
e
tt
in
g
s
Accessing the Menus
Follow this procedure to access the different menus:
1 Open the one-touch speed dial panel.
2 Press Data Registration.
3 Press Set.
4 Use
N or M to select the menu you want.
• You can select from the following:
–
USER SETTINGS ( p. 14-4)
– REPORT SETTINGS ( p. 14-5)
–
TX SETTINGS ( p. 14-6)
– RX SETTINGS ( p. 14-7)
–
PRINTER SETTINGS ( p. 14-8)
– POLLING BOX ( p. 14-9)
–
SYSTEM SETTINGS ( p. 14-10)
5 Press Set to access the settings under the
menu you selected.
6 Refer to the appropriate table (
following
pages) and use these guidelines to select and
register settings:
❏ Use N or M to scroll through the
settings.
❏ To register a setting or access sub-
settings, press Set.
❏ To return to a previous level, press Data
Registration.
•
For your settings to be registered, be
sure to press Set after making a
selection or entering information.
• If at any stage you wish to return to
standby mode, press Stop.
• If you pause for more than 60
seconds while accessing a menu, the
unit will automatically return to
standby mode.
7
When you are finished, press Stop to return to
standby mode.
DATA REGSTRATION
USER SETTINGS
ECM RX Ex:
15:00 FaxOnly Ex: