Canon L240 - Manual (Page 70)

6-10 Speed Dialling Chapter 6
12
Press Set.
13 This completes the basic coded speed dialling
settings.
To continue registering other coded speed
dialling codes, press Data Registration and
repeat the procedure from step 7.
-or-
To end registering coded speed dialling
codes, press Stop to return to standby mode.
-or-
To register the transmission type for the
current code you are registering, continue
with the steps below.
14
Press Set.
15
Use
▼ or ▲ to select ON.
16 Press Set twice.
17
Use
▼ or ▲ to select the transmission type
setting you want.
• You can select from the following:
–
REGULAR TX
Normal transmission. (Choose this
setting if you previously set
PSWD/
SUBADDRESS and no longer want to
send with this setting.)
– PSWD/SUBADDRESS
Transmission with a subaddress and/
or password. For details, see the
following page.
DATA ENTRY OK
OPTIONAL SETTING
)02= Ex:
15:00 FaxOnly Ex:
OFF Ex:
ON
REGULAR TX
TX TYPE
Ex: