Periodic cleaning, Cleaning the fax’s exterior – Canon L240 User Manual
Page 146
12-2
Maintenance
Chapter 12
Periodic Cleaning
This section describes the necessary cleaning procedures for your FAX. Please note
the following before cleaning your unit:
•
Be sure to disconnect the power cord before cleaning the FAX. Since documents
in memory are erased when the power is disconnected, print or send any
documents stored in memory before disconnecting the power cord (
p. 9-5).
•
Do not use tissue paper, paper towels, or similar materials for cleaning; they can
stick to the components or generate static charges.
Cleaning the FAX’s Exterior
Follow this procedure to clean the FAX’s outer casing:
Caution
Never use volatile liquids such as thinners, benzene, acetone, or any other chemical
cleaner to clean the interior of the FAX; these can damage the unit’s components.
1
Disconnect the power cord from the FAX.
2
Wipe the FAX’s exterior with a clean, soft,
lint-free cloth moistened with water or diluted
dishwashing detergent solution.
3
When you are finished, reconnect the power
cord.