Park distance control pdc – BMW 2013 X5 User Manual
Page 117
The system stores and maintains the speed.
Interrupting the system
Press the lever up or down, arrow 3: display 1 in
the speedometer changes color, refer to
page
In addition, the system is interrupted:
▷
When the brakes are applied.
▷
When the transmission position D is disen‐
gaged.
▷
When DTC is activated or DSC is deacti‐
vated.
▷
When DSC or ABS is intervening.
Warning lamp
The warning lamp lights up if cruise
control has been deactivated auto‐
matically, e.g., by a control interven‐
tion of the DSC. A message appears on the Con‐
trol Display.
Resuming cruising speed
Press button 4:
The stored speed is resumed and maintained.
Deactivating the system
▷
Press the lever upward or downward twice,
arrow 3.
▷
Switch off the ignition.
The stored speed is cleared.
Displays in the instrument cluster
1 Stored desired speed
▷
Green: the system is active.
▷
Orange: the system is interrupted.
2 Selected desired speed appears briefly
If the display --- mph or --- km/h appears briefly,
conditions may not be adequate to operate the
system.
Call up Check Control messages, refer to
page
.
Malfunction
The warning lamp lights up. The sys‐
tem is malfunctioning or has failed.
A message appears on the Control
Display. More information, refer to page
Park Distance Control PDC
The concept
In addition to the PDC Park Distance Control, the
backup camera, refer to page
switched on.
PDC supports you when parking. A slow ap‐
proach to an object in front of or behind your ve‐
hicle is announced by:
▷
Signal tones.
▷
Visual display.
Measurement
Measurements are made by ultrasound sensors
in the bumpers.
The range is approx. 6 ft/2 m.
An acoustic warning is first given:
▷
By the front sensors and two rear corner
sensors at approx. 24 in/60 cm.
▷
By the rear middle sensors at approx.
5 ft/1.50 m.
Seite 117
Driving comfort
Controls
117
Online Edition for Part no. 01 40 2 901 869 - 03 12 500