BMW 2013 X5 User Manual

Page 290

Advertising
background image

Due to the high voltage present in the system,
there is the danger of fatal injuries if work is car‐
ried out improperly.◀

Follow the general instructions on lamps and
bulbs, refer to page

288

.

Parking lamps, roadside parking lamps,

daytime running lights

These lamps are made using LED technology.
Contact your service center in the event of a
malfunction.

Turn signals, front

Follow the general instructions on lamps and
bulbs, refer to page

288

.

The illustration shows the right side of the en‐
gine compartment.
24-watt bulb, PY24W

1.

Rotate bulb holder to the left and remove it
along with the bulb.

2.

Rotate the bulb to the right along with the
socket and replace.

3.

Install in the reverse order.

Side marker lamps, rear

Contact the service center for bulb replacement.

Fog lamps

Follow the general instructions on lamps and
bulbs, refer to page

288

.

Contact your service center in the event of a
malfunction.

Tail lamps

Turn signal, brake lamp: 21-watt bulb,
P21W.

Brake force display: 21-watt bulb, P21W.

Backup lamp: 16-watt bulb, W16W

Tail lamp: LED technology.
Contact your service center in the event of a
malfunction.

Arrangement of tail lamps

1 Tail lamp
2 Brake force display
3 Brake lamp
4 Tail lamp/side marker lamp
5 Backup lamp
6 Turn signal

Turn signals, brake lamps and backup

lamps

Follow the general instructions on lamps and
bulbs, refer to page

288

.

Seite 290

Mobility

Replacing components

290

Online Edition for Part no. 01 40 2 901 869 - 03 12 500

Advertising