Top view – BMW 2013 X5 User Manual
Page 122
Three-dimensionally-shaped markings are dis‐
played.
Image on the Control Display
Switching on the rear view camera
using iDrive
With PDC activated:
"Rear view camera"
The image of the rear view camera is displayed.
The setting is stored for the remote control cur‐
rently in use.
Brightness
With the rear view camera switched on:
1.
Select the symbol.
2.
Turn the controller until the desired setting
is reached and press the controller.
Contrast
With the rear view camera switched on:
1.
Select the symbol.
2.
Turn the controller until the desired setting
is reached and press the controller.
Camera
The lens of the rear view camera is under the
grasping lip of the tailgate.
The presence of dirt can impair image quality.
Clean the lens with a moist, nonabrasive cloth.
Top View
The concept
Top View assists you when parking and maneu‐
vering. To accomplish this, the door region and
road surface region are shown on the Control
Display.
Detection
Detection is carried out by two cameras
integrated into the exterior mirror and the rear
view camera.
The range is:
▷
Approx. 7 ft/2 m to the side.
▷
Approx. 7 ft/2 m to the rear.
Obstacles up to the height of the exterior mirrors
are thus detected in a timely fashion.
System limits
Top View cannot be used in the following situa‐
tions:
▷
With a door open.
▷
With the tailgate open.
▷
With an exterior mirror folded in.
▷
In poor light.
The arrows next to the vehicle are displayed in a
shaded form on the Control Display and a sym‐
bol appears at the corresponding location on the
vehicle.
Check the traffic situation as well
Check the traffic situation around the ve‐
hicle with your own eyes. Otherwise, an accident
could result from road users or objects located
outside the picture area of the cameras.◀
Switching on automatically
Select transmission position R with the engine
running.
The images from Top View and PDC are dis‐
played when the system has been switched on
using iDrive.
Seite 122
Controls
Driving comfort
122
Online Edition for Part no. 01 40 2 901 869 - 03 12 500