Interior equipment, Vehicle equipment, Universal garage door opener – BMW 2013 X5 User Manual

Page 135

Advertising
background image

Interior equipment

Vehicle equipment

This chapter describes all series equipment as
well as country-specific and special equipment
offered for this model series.Therefore, it also
describes equipment that may not be found in
your vehicle, for instance due to the selected
special equipment or the country version. This
also applies to safety-related functions and sys‐
tems.

Universal Garage Door

Opener

The concept

The Universal Garage Door Opener can be used
to operate up to 3 functions in remote-control‐
led systems, such as garage door drives or light‐
ing systems. The Universal Garage Door Opener
replaces up to 3 different hand-held transmit‐
ters. To operate it, the buttons on the interior
rearview mirror must be programmed for the de‐
sired functions. The hand-held transmitter for
the system is needed for the programming pro‐
cedure.

During programming
During programming and before activat‐

ing a device using the Universal Garage Door
Opener, ensure that there are no people, ani‐
mals, or objects in the range of movement of the
remote-controlled device; otherwise, there is a
risk of injury or damage.
Also follow the safety instructions of the hand-
held transmitter.◀

Before selling the vehicle, delete the stored
functions for security reasons.

Compatibility

If this symbol is printed on the packaging
or in the operating instructions of the

system being operated, the system is generally
compatible with the Universal Garage Door
Opener.
If you have any questions, please contact:

Your service center.

www.homelink.com on the Internet.

HomeLink is a registered trademark of Johnson
Controls, Inc.

Controls on the interior rearview mirror

1 LED
2 Buttons
3 Hand-held transmitter, required for pro‐

gramming.

Programming

General information

1.

Switch on the ignition.

2.

Initial setup:
Press the right and left buttons on the inte‐
rior rearview mirror simultaneously for ap‐
prox. 20 seconds until the LED on the inte‐
rior rearview mirror begins to flash. All
programmed settings of the buttons on the
interior rearview mirror are deleted.

3.

Hold the hand-held transmitter of the sys‐
tem to be operated a distance of approx. 1
to 3 in/2.5 to 8 cm away from the buttons on
the interior rearview mirror. The required

Seite 135

Interior equipment

Controls

135

Online Edition for Part no. 01 40 2 901 869 - 03 12 500

Advertising