BMW 2012 X6M User Manual
Page 137
▷
Retaining straps* on the left and right side
trim for fastening small objects.
▷
Lashing rail with lashing eyes*. You can se‐
cure heavy-duty cargo straps on the lashing
eyes. They can be removed at the notches
in the rails. To move the lashing eyes, press
the button.
Read and comply with the information enclosed
with the heavy-duty cargo straps.
Floor panel flap
To access the onboard vehicle tool kit etc.
To open, swing up the flap by the handle, refer
to arrow.
The cargo floor cover is lockable*.
Adaptive fixing system*
The adaptive fixing system is used to divide up
the cargo area. It consists of two brackets with
a telescopic rail and retaining straps. These are
guided into the two rails on the cargo area floor.
Securing cargo
Before using the adaptive fixing system,
fold up and lock the rear seat backrest; other‐
wise, the cargo could be thrown into the vehicle
interior in an accident.◀
1 Brackets
2 Telescopic rail
3 Notch in the cargo area rail
Mounting brackets
The two brackets are connected with a tele‐
scopic rail.
1.
Insert the brackets at the respective notch
in the rail on the cargo area floor.
2.
Press down the brackets to push them into
the desired position.
3.
Check the firm seating of the brackets. They
must be clearly heard to engage.
No cargo on brackets
Do not lay cargo on the brackets, as oth‐
erwise they could be unlocked.◀
Dividing up cargo area
The cargo can be positioned as follows:
▷
Between the rear seat backrest and the tele‐
scopic rail
▷
Between the telescopic rail and the retaining
strap
Positioning cargo between telescopic rail and
retaining strap:
Seite 137
137
Online Edition for Part no. 01 40 2 606 735 - 03 11 500