Displays – BMW 2012 X6M User Manual
Page 80
Language
Setting the language
To set the language on the Control Display:
1.
"Settings"
2.
"Language/Units"
3.
"Language:"
4.
Select the desired language.
The setting is stored for the remote control cur‐
rently in use.
Setting the voice dialog
To switch between a standard dialog and a short
dialog.
1.
"Settings"
2.
"Language/Units"
3.
"Speech mode"
4.
Select the desired dialog.
Units of measure
Setting the units of measure
To set the units for fuel consumption, route/dis‐
tance, temperature, and pressure:
1.
"Settings"
2.
"Language/Units"
3.
Select the desired menu item.
4.
Select the desired unit.
The setting is stored for the remote control cur‐
rently in use.
Brightness
Setting the brightness
To set the brightness of the Control Display:
1.
"Settings"
2.
"Control display"
3.
"Brightness"
4.
Turn the controller until the desired bright‐
ness is set.
5.
Press the controller.
The setting is stored for the remote control cur‐
rently in use.
Depending on the light conditions, the bright‐
ness control may not be clearly visible.
Seite 80
80
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Displays