If needed – BMW 2012 X6M User Manual
Page 199
▷
Switch the radio on and off again.
Music files can only be played back softly.
▷
Adjust the volume settings on the device.
Playback is disturbed when buttons are pressed
or by other messages on the device.
▷
Switch off the button tones and other signal
tones on the device.
Playback is interrupted by a telephone call or
traffic bulletin and is not resumed automatically.
▷
Switch the radio on and off again.
Playback is not possible if the mobile phone is
connected both via Bluetooth Audio and via the
extended connectivity of the music player in the
mobile phone*.
▷
Disconnect one of the two connections; for
example, disconnect the audio connection,
refer to page
, and restart playback.
If all points in this list have been checked and the
required function is still not available, please
contact the hotline or service center.
Software Update*
The vehicle supports various external devices
depending on the current software version. With
a software update, the vehicle can support new
cell phones or new external device, for example.
▷
USB.
Software updates and related current infor‐
mation is available at www.bmw.com/up‐
date.
Displaying the current version
The currently installed software is displayed.
1.
"Settings"
2.
"Software update"
3.
"Show current version"
Select desired version* to display additional in‐
formation*.
Updating software via USB*
The software may only be updated when the ve‐
hicle is stationary.
1.
Store the file for the software-update in the
main director of a USB flash drive.
2.
Insert the USB flash drive into the USB in‐
terface of the USB audio interface in the
center armrest. An update via the USB in‐
terface in the glove compartment is not pos‐
sible.
3.
"Settings"
4.
"Software update"
5.
"Update software"
6.
If necessary. "USB".
7.
"Start update"
8.
"OK"
All listed software updates are installed.
Restoring the previous version
If it should become necessary, the software ver‐
sion prior to the last software update can be re‐
stored.
The previous version can only be restored when
the vehicle is stationary.
1.
"Settings"
2.
"Software update"
3.
"Restore previous version"
4.
"OK" Double-click.
All listed software updates are removed.
Note
While the software is being updated or a previ‐
ous version is being restored, BMW Assist*, Of‐
fice functions*, and the connected devices are
temporarily unavailable. Wait several minutes
for the functions to become available again.
Seite 199
199
Online Edition for Part no. 01 40 2 606 735 - 03 11 500