Cd/multimedia – BMW 2012 X6M User Manual

Page 196

Advertising
background image

Notes

Do not expose the audio device to extreme en‐
vironmental conditions, such as very high tem‐
peratures; refer to the audio device operating
instructions.
Depending on the configuration of the audio
files, e.g., bit rates greater than 256 kbit/s, the
files may not play back correctly in each case.

Information on connection

The connected audio device is supplied with
a max. power of 500 mA if supported by the
device. Therefore, do not additionally con‐
nect the device to a socket in the vehicle;
otherwise, playback may be compromised.

Do not use force when plugging the con‐
nector into the USB interface.

Do not connect devices such as fans or
lamps to the USB audio interface.

Do not connect USB hard drives.

Do not use the USB audio interface to re‐
charge external devices.

Bluetooth audio*

At a glance

Music files on external devices such as audio
devices or mobile phones can be played
back via Bluetooth.
Use of a mobile phone as an audio source,
refer to page

217

.

Bluetooth® is a registered trademark of
Bluetooth® SIG, Inc.

The sound is output on the vehicle loud‐
speakers.

The volume of the sound output is depend‐
ent on the device. If necessary, adjust the
volume on the device.

Up to four external devices can be paired
with the vehicle.

Requirements

The device is suitable. Details can be found
at www.bmw.com/bluetooth.

The device is ready for operation.

The ignition is switched on.

Bluetooth is activated on the vehicle, refer to
page

217

, and on the device.

Bluetooth presettings must be made on the
device, such as for a connection without
confirmation or visibility; refer to the device
operating instructions.

A number with at least four and a maximum
of 16 digits is defined as the Bluetooth pass‐
key. It is only required once for pairing.

Pairing and connecting

Pairing a device
To avoid becoming distracted and posing

an unnecessary hazard both to your own vehi‐
cle's occupants and to other road users, only
pair the device while the vehicle is stationary.◀

1.

"CD/Multimedia"

2.

"Bluetooth® (audio)"

3.

If necessary, "Bluetooth® audio".

4.

"Add new phone"
The Bluetooth name of the vehicle is dis‐
played.

5.

Perform additional steps on the device, refer
to the device operating instructions: for in‐
stance, search for or connect the Bluetooth
device or a new device.
The Bluetooth name of the vehicle appears
on the device display.

6.

Select the Bluetooth name of the vehicle on
the device display.
You are prompted by the iDrive or device to
enter the same Bluetooth passkey.

Seite 196

196

Online Edition for Part no. 01 40 2 606 735 - 03 11 500

CD/multimedia

Advertising
This manual is related to the following products: