BMW 2012 X6M User Manual

Page 89

Advertising
background image

When the system has not been initialized.

When driving on a snowy or slippery road
surface.

Sporty driving style: slip in the drive wheels,
high lateral acceleration.

When driving with snow chains*.

When driving with a compact wheel*, the Flat
Tire Monitor is unable to function.

Status display

The current status of the Flat Tire Monitor can
be displayed on the Control Display, e.g.,
whether or not the FTM is active.

1.

"Vehicle Info"

2.

"Vehicle status"

3.

"Flat Tire Monitor"

The status is displayed.

Initialization

The initialization process adopts the set inflation
tire pressures as reference values for the detec‐
tion of a flat tire. Initialization is started by con‐
firming the inflation pressures.
Do not initialize the system when driving with
snow chains* or with a compact wheel*.

1.

"Vehicle Info"

2.

"Vehicle status"

3.

"Reset"

4.

Start the engine - do not drive away.

5.

Start the initialization with "Reset".

6.

Drive away.

The initialization is completed while driving,
which can be interrupted at any time.
The initialization automatically continues when
driving resumes.

Indication of a flat tire

The warning lamp lights up red. A
message appears on the Control Dis‐
play. In addition, a signal sounds.

There is a flat tire or a major loss in tire inflation
pressure.

Reduce your speed and stop cautiously. Avoid
sudden braking and steering maneuvers.
When a flat tire is indicated, DSC Dynamic Sta‐
bility Control is switched on if necessary.

Actions in the event of a flat tire

Run-flat tires

You can continue driving with a damaged tire at
speeds up to 50 mph/80 km/h.

Do not continue driving without run-flat
tires

If the vehicle is not equipped with run-flat tires
as provided at the factory, do not continue driv‐
ing. Continuing to drive could cause severe ac‐
cidents.◀

Continued driving with a flat tire

If continuing to drive with a damaged tire:

1.

Avoid sudden braking and steering maneu‐
vers.

2.

Do not exceed a speed of 50 mph/80 km/h.
If the defective tire continues to lose pres‐
sure, its position will be indicated to you on
the Control Display.

3.

At the next opportunity, check the inflation
pressure in all four tires.
If the tire inflation pressure in all four tires is
correct, the Flat Tire Monitor may not have
been initialized. In this case, initialize the
system.

Possible driving distance with complete loss of
tire inflation pressure:

With a light load:
1 to 2 people without luggage:
Approx. 155 miles/200 km.

With a medium load:
2 persons, cargo area full, or 4 persons with‐
out luggage:
Approx. 94 miles/150 km.

With a full load:
4 or more persons, cargo area full:

Seite 89

89

Online Edition for Part no. 01 40 2 606 735 - 03 11 500

Reference

Mobility

Communication

Entertainment

Navigation

Driving tips

Controls

At a glance

Advertising
This manual is related to the following products: