N select cycle and wash time; 0> start the washer, Select cycle and wash time; 0> start the washer – Whirlpool 3LA5581 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
n
Select CYCLE and WASH TIME;
0> Start the washer
A.
Push in the Control Knob and turn it to
the right. It must be pushed in and
turned only clockwise.
10 NORMAL
6 LIGHT
NORMAL 10 ^ /4^^
HEAVY 14
SUPER WASH 4
l^rs GFJ
B.
Stop on a number in the cycle you
want. The numbers are minutes of
wash time. The drawing shows 10 min
utes of agitation in the REGULAR
NORMAL Cycle.
C.
Start the washer by pulling out the
Control Knob. The washer will fill to the
level you set with wash water of the
selected temperature. After filling, the
washer will agitate for the selected
number of minutes.
D.
To stop the washer at any time, push
in the Control Knob. To restart the
washer, pull out the Control Knob.