Special tips, Caring for your range, Surface units and reflector bowls – Whirlpool FES340Y User Manual

Page 25: Removing

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

C A R I N G F O R Y O U R R A N G E

Special tips

• Keep the kitchen well ventilated during the Self­

Cleaning cycle to help get rid of heat, odors and
smoke.

• After the oven is cool, wipe up any residue or

ash with a damp cloth.

• Clean the oven before it gets heavily soiled.

Cleaning a very soiled oven takes longer and
results in more smoke than usual.

If the Self-Cleaning cycle does not get the oven
as clean as you expected, the cycle may not
have been set long enough or you may not
have prepared the oven properly. Set the Self­
Cleaning cycle longer the next time and hand-

clean areas noted on page 22.

Caring For Your Range

In This Section

Page

Page

Surface units and reflector bowls ........... ........... 25

Cleaning chart......................... ............................2B

Lift-up cooktop ........................................ ........... 27

The oven light.......................... ............................29

Your range is designed for ease of care. Most
cleaning can be done with Kerns found around

your home. Cleaning your range whenever spills

or soiling occurs will help to keep K looking and
operating like new.

^WARNING

Burn and Electrical Shock Hazard

Make sure all controls are off and the range
is cool before cleaning or servicing.

Failure to do so could resuK in burns or
electrical shock.

Surface units and reflector bowls

Removing

1. Make sure all control knobs are turned off and

cool before removing surface unKs and

reflector bowls.

2.

Lift the edge of the unK, opposite the recep­

tacle, just enough to clear the element hold­
down clip and the reflector bowl.

25

Advertising