Whirlpool FES340Y - Manual (Page 26)

C A R I N G F O R Y O U R R A N G E
3. Pull the surface unit straight away from the
receptacle.
4. Lift out the reflector bowl. See “Cleaning chart”
on page 28 for cleaning instructions.
Replacing
1. Make sure all control knobs are turned off and
cool before replacing surface units and
reflector bowls.
2. Line up openings in the reflector bowl with the
surface unit receptacle and the element hold­
down clip.
3. Hold the surface unit as level as possible with
the terminal just started into the receptacle.
Push the surface unit terminal into the
receptacle.
26