Adjusting the oven temperature control – Whirlpool FEP350Y User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R R A N G E
Adjusting the oven temperature control
Oven temperature controls will gradually
shift after years of use. So, even though
your new oven is properly adjusted to
provide accurate temperatures, it may cook
faster or slower than your old oven.
If, after using the oven for a period of time,
you are not satisfied with the temperature
settings, you can adjust them by following
these steps:
1. Turn the Oven Temperature Control
Knob to the off position. Pull knob
straight off and flip it over.
2. Loosen the locking screws inside the
control knob. Note the position of the
notches.
3. To lower the temperature, hold knob
handle firmly and move the tooth a notch
counterclockwise. Each notch equals
about 10‘’F(5°C).
4. To raise the temperature, hold knob
handle firmly and move the tooth a notch
clockwise. Each notch equals about 10°F
(5»C).
5. Tighten the locking screws and replace
the control knob.
Notches Tooth
13