The anti-tip bracket – Whirlpool FEP350Y User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U S I N G Y O U R R A N G E

Replacing the storage drawer:

1. Fit

ends of drawer slide rails into the

drawer guides on both sides of opening.

2.

Lift

drawer front and

push in

until metal

stops on drawer slide rails clear white

stops on drawer guides.

Lift

drawer front

again to clear second stop and

slide

drawer closed.

Drawer slide rail

The anti-tip bracket

The range will not tip during normal use. However, tipping can occur if you apply too much

force or weight to the open door without the anti-tip bracket properly secured.

AWARNING

Personal Injury Hazard

•To reduce risk of range tipping over, secure range with a properly

installed anti-tip bracket supplied with range or an optional wall-

mounted anti-tip bracket kit.

(k)

• If range is moved for cleaning or service, check that anti-tip device

is engaged before using range.

Failure to follow the above precautions could result in personal injury.

To verify the anti-tip bracket is
engaged (if you have a fioor

bracket):

• Remove

the storage drawer. (See page 19.)

• Look

to see if the anti-tip bracket is attached

to floor with screws.

• Make sure

one rear leveling leg is positioned

under the anti-tip bracket.

• See

Installation Instructions for further details.

To verify the anti-tip bracket is
engaged (if you have a waii
bracket):

• Look

to see if the anti-tip bracket is attached

with screws to the wall behind the control

panel.

• Make sure

the cable on the back of the range

is secured by the two hooks on the bracket.

• Cable

must be unhooked from wall bracket to

move range for cleaning or service. Recon­

nect cable before using range.

• See

Installation Instructions for further details.

Rear leveling leg

20

Advertising