Setting the clock, Minute, Using the minute timer – Whirlpool FGP335B User Manual

Page 11: When the set time has passed, the, Rimn n, Lhu u

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U S I N G Y O U R R A N G E

Setting the clock

When the range is first plugged in, or
following a power outage, “12:00" will flash
on the display.

1. Slide

the Clock/Timer Switch to the

CLOCK position.

Push in and hold

the Hour button until

the correct hour appears on the display.

(The numbers will only count forward.)

CLOCK

3. Push in and hold

the Minute button until

the correct minutes appear on the display.

MINUTE

Using the Minute Timer

The Minute Timer does not start or stop the
oven. It works like a kitchen timer. Set it in
minutes up to 1 hour, 59 minutes. The control
will beep when the set time is up.

1. Slide the Clock/Timer switch to the TIMER

position. The display will show “0:59"
(59 minutes).

TIMER

2. To set a time more than 59 minutes,

push in and release

the Hour button. The

display will show “1:59". The time can now
be adjusted down by pushing in and holding

the Minute button until the correct time

shows on the display.

To set a time less than 59 minutes, push
in and hold

the Minute button until the

correct time shows on the display.

The Minute Timer will automatically start
when the Minute button is released.

3.

When the set time has passed,

the

display will show “0:00” and the control will
beep continuously.

Slide

the Clock/Timer

Switch to the CLOCK position to cancel the
Minute Timer and return to the dock mode.

CLOCK

rimn n

LhU U

11

Advertising