Burn, fire and explosion hazard, Product damage hazard, Cookware tips – Whirlpool FGP335B User Manual

Page 8: Warning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U S I N G Y O U R R A N G E

Until you get used to the settings, use

the following as a guide.

For best results,

start

cooking at the high setting: then

turn

the control knob down to continue cooking.

SETTING

RECOMMENDED USE

LITE

• To light the burner. After the

burner lights, turn control
back to a desired setting.

HI

• To start foods cooking.

• To bring liquids to a boil.

Medium

• To hold a rapid boil.

• To fry chicken or pancakes.

• For gravy, pudding and

icing.

• To cook large amounts of

vegetables.

LO

• To keep food warm until

ready to serve.

NOTE:

Do not cook with the control in the

LITE position.

In case of a prolonged power

failure

Surface burners can be manually lighted.

Hold

a lit match near a burner and

turn

the

control knob to the LITE position.

After the

burner lights, turn

the control knob to the

desired setting.

^WARNING

Burn, Fire and Explosion Hazard

•Burner flame should not extend

beyond the edge of the cooking
utensil. The flame could burn you and
cause poor cooking results.

• Be sure all control knobs are turned to

OFF when you are not cooking.
Someone could be burned or a fire
could start if a burner is accidentally
left ON.

• If the flame should go out while

cooking, or if there is a strong gas
odor, turn the burners OFF. Wait five

minutes for the gas odor to disappear
before relighting burner. If gas odor is

still present, see safety note on page 3.

Failure to follow these precautions

could result in explosion or fire.

Product Damage Hazard

Do not leave an empty utensil, or one
which has boiled dry, on a hot surface
burner.

The utensil could overheat and could
damage the utensil or cooking product.

Cookware tips

No one brand of cookware is best for all
people. Knowing something about pan
materials and construction will help you
select the correct cookware for your needs.

• NOTE: For best results and greater fuel

efficiency,

use only flat-bottomed cook­

ware in good condition.

• The pan

should have straight sides and a

tight-fitting lid.

• Choose medium to heavy gauge

(thick­

ness) pans that are fairly lightweight.

• The pan material

(metal or glass) affects

how fast heat transfers from the surface
burners through the pan material and how
evenly heat spreads over the pan bottom.
Choose pans that provide the best cooking
results.

Advertising