Canon 800 - Manual (Page 18)

– 16 –
4 Slowly set the lens in the lens holder.
IMPORTANT
When you are fitting a zoom lens, check that the 2
marks on the rim of the lens are matched with the
contacts on the lens holder. These contacts must be
aligned snugly for the scanner to correctly recognize
the zoom lens type. Take care also not to touch the
contacts with your fingers.
5 Slide the lens holder back into the main unit, taking care
not to drop the lens.
Push the holder slowly into the bracket until you hear it
click into place.
Preparing the Printer
To use the Microfilm Scanner 800 in ReaderPrinter mode,
a Canon FilePrint 400 printer (sold separately) is required.
Contact an authorized Canon retailer or service technician
for details.
NOTE
Refer to the FilePrint 400 Instructions for informa-
tion on setting up the printer.
Before You Begin...
Canon FilePrint 400