Canon 800 - Manual (Page 21)

– 19 –
!£ AF (Auto Focus) key Used to automatically focus the image.
!¢ ZOOM (enlarge/reduce) key Used to enlarge or reduce the size of the image projected
on the screen. Press the ZOOM key and then use the
control knob to enlarge and reduce the image on the screen.
FOCUS key Adjusts the focus of the image projected on the screen.
Press the FOCUS button and then turn the control knob
until the image on the screen is in focus.
!§ ROTATE key Rotates the image projected on the screen. Press the
ROTATE key and then turn the control knob. The image
rotates to match the rotation of the control knob.
!¶ Control knob Turn this knob to adjust the image after the ZOOM, FO-
CUS or ROTATE key has been pressed.
Before You Begin...
P 2 P 3 P 4
Operation Keyboard (optional)
!• Image adjust selection key Selects the image adjustment mode (zoom, focus or rotate).
!ª Image adjust mode indicators These indicators show the image adjustment mode selected
using key !•.
@º Image adjust control dial After selecting the image adjustment mode, turn this dial to
adjust the image.
@¡ Rotate key Rotates the image 90
°
clockwise or counterclockwise.
@™ Film control knob When a motorized carrier is installed, this knob feeds
through the film. Turn the knob to the right to advance the
film and to the left to rewind the film. (Note that this knob
cannot be used with the FS Controller I or III.)
@£ RESET key Restores the default settings for each setting mode.
@¢ Paper Select key Selects the paper cassette or multipurpose tray in
ReaderPrinter mode.
Disabled key Not used by the MS800.