Selecting the scan size, Setting the scanning position – Canon 800 User Manual
Page 28
– 26 –
4
A
R
4
A
R
3 /
A
4
A
3
A
4
A
4
A
4
A
R
4
A
R
3 /
A
4
A
3
A
4
A
4
A
4
A
R
4
A
R
3 /
A
4
A
3
A
4
A
4
A
Selecting the Scan Size
If image size detection is set to ON in the application
program in Scanner mode, select the scan size.
Press the Scan Size key on the operation panel and set the
scan size.
Note
If image size detection is set to OFF in the applica-
tion software or trimming/border removal is selected,
the Scan Size selection function light switches off
and the function is disabled.
Setting the Scanning Position
If an image is too big, you can select a specific area to be
scanned by pressing the Scanning Position key. The indica-
tor for the currently selected mode lights when the key is
pressed and the setting changes each time the key is
pressed. Press the key until the desired mode lights.
(
) The central area of the screen is scanned.
(
) The left side of the screen is scanned.
(
) The left and right sides of the screen are scanned as 2
consecutive images. Because the left side is scanned first,
it is not necessary to reverse the sequence of printed pages.
Note
If trimming is selected in Scanner mode, the center
(
) and left edge (
) reference positions cannot
be selected.
Using the Scanner
(120V model)
(220 – 240V model)