Brother MFC7000FC - Manual (Page 27)

^ ■ ■
Stl............... ■_..:
*JL <fcj« .AwJLftwininiyi mnumt.i.'
• B A S I C F A X 0 P E S A T J O N
Automatic Transmission
This is the easiest way to send a fax. IMPORTANT Do not pick up the handset
—OR—press [Speaker Phone |.
H“ Insert the document face down in the feeder.
Enter the fax number from One Touch or Speed Dial or Tel-index or keypad.
# Press W.
Dual Access
If the document feeder is empty, you can place a document in the feeder, set
temporary settings, dial a number, and begin scanning the fax into memory, even
when the MFC is receiving a fax, sending a fax, or printing a fax from memory.
The screen displays the new job number and how much memory is available.
If you get a MEMORY FULL message while scanning the first page of a fax press
W to cancel the scan. If you get a MEMORY FULL message while scanning in a
subsequent page, you’ll have the option to press to transmit the pages
scanned so far, or to press S to cancel the operation.
See
Canceling
Job
pp. 20-21
and
Canceling
Remaining
Jobs
pp. 30-31
Checking Job Status
You can check which jobs are in the memory waiting to be sent, press I Function!.
Q], d] to check it While the MFC is sending or receiving a fax, press S. The
screen displays job numbers. Press 0 or [0 to see them.
Real Time lyansmission______________________
When Memory is full, the MFC cannot continue to scan documents into memory
before sending. However, you can turn on “REAL TIME TX." (iFunctionj.
(T|, [T],
[U). Then place the documents in the feeder and enter the fax number. As soon
as the phone line is free, the MFC starts dialing and sending the fax.
Place the document in the feeder.
2 Press iFunciionj, [T], [T], [8]. The screen displays
8.RERL TIME TX