Printing a fax in memory, Backup printing option, Erasing messages – Brother MFC7000FC User Manual
Page 70: Backup printing option erasing messages, Press [siort, Ifunttionl
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C H A P T E R E I G H T
p, „ ^ „ PH
■'
,0
w'wmr
"«
‘Tfyr’
Printing a Fax in Memory
If you have Messi^e Starve set to FAX:ON for remote retrieval, you can still
print a fax in the memory when you are at your MFC:
Press IFunctionl.m.iTI. [71.
# Press [Siort].
#
Press H.
Backup Printing Option
When you choose FAX:ON in the Message Center mode, all incoming fax
messages are stored in the available memory for retrieval. To print a backup copy
automatically, turn this option on.
Press
iFunttionl.
(T), 5],
d]. The screen prompts you to select a setting.
C
BfiCKUP
PRINT: ON
SELECT
& SET
:)
^ Press 13 or [S to display ON (or OFF).
S' Press 0 when the screen displays your selected setting.
IS Press S to exit.
Erasing Messages
If you choose to erase all fax messages, the MFC will print any previously
unprinled fax messages before erasing them from memory. Fax mess^es cannot
be erased individually.
You can erase voice messages and memos (or voice alarni) individually, or all at once.
To erase voice messages individually
^ Press (Press
IFunttionl
and then ® for Voice Alarm.) After two seconds,
the MFC beeps and begins message playback. Each message is preceded by
one long beep, and followed by two short beeps.