System connections (continued), Ac power connection, Demonstration mode – Sharp CD-ES99 User Manual

Page 12: Outdoor fm antenna

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CD-ES900

CD-ES99

System connections (continued)

■ AC power connection

After checking ail the connections have been made correctly, plug
the AC power cord of this unit into the AC outlet. If you plug in the

unit first, the unit will enter the demonstration mode.

Notes

The unit will start the tape initialization when plugged in to the AC
outlet. During this process, an initializing sound will be heard and
the unit cannot be turned on. Wait until the process is finished.

Unplug the AC power cord from the AC outlet if the unit will not be
in use for a prolonged period of time.

■ Demonstration mode

The first time the unit is plugged in. the

unit will enter the demonstration mode.

You will see words scroll.

To cancel the demonstration

mode:

When the unit is in the power stand-'

by mode (demonstration mode),

,

press the X-BASS/DEMO button.

.

The unit will enter the low power •--------------

consumption mode.

To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/

DEMO button again.

Note:

When the power is on, the X-BASS/DEMO button can be used to se­

lect the extra bass mode.

■ Outdoor FM antenna

Use an outdoor FM antenna if you require better reception. Consult

your dealer.

Cooling fan:

This product is equipped with a cooling fan inside, which begins to

run once the power is on for better heat radiation.

Tiff

75 ohm

Outdoor
FM antenna

coaxial cable

/////////////////

Note:

When an outdoor FM antenna is used, disconnect the supplied FM

antenna wire.

12

Advertising
This manual is related to the following products: