Cassette deck, Remote control, If trouble occurs – Sharp CD-ES99 User Manual

Page 33: Clearing all the memory (reset), Ii o

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CD-ES900

CD-ES99

Cassette deck

Tuner

Symptom

Possible cause

• Cannot record.

• Is the erase-prevention tab re­

moved?

• Cannot record tracks with

proper sound quality.

• Cannot erase completely.

• Is it a normal tape? (You cannot

record on a metal or CrO; tape.)

• Sound skipping.

• Cannot hear treble.

• Sound fluctuation.

• Is there any slack?

• Is the tape stretched?

• Are the capstans, pinch rollers,

or heads dirty?

• Cannot remove the tape.

• If a power failure occurs during

playback, the heads remain en­

gaged with the tape. Do not open
the compartment with great
force.

Remote control

Symptom

Possible cause

• The remote control does

not operate.

• Is the AC power cord of the unit

plugged in?

• Is the battery polarity correct?

• Are the batteries dead?

• Is the distance or angle incor­

rect?

• Does the remote control sensor

receive strong light?

Symptom

Possible cause

• The radio makes unusual

noises continuously.

• Is the unit placed near the TV or

computer?

• is the FM antenna or AM loop an­

tenna placed properly? Move the
antenna away from the AC power
cord if it's located nearby.

■ If trouble occurs

When this product is subjected to strong external interference

(mechanical shock, excessive static electricity, abnormal supply

voltage due to lightning, etc.) or if it is operated incorrectly, it may

malfunction.
If such a problem occurs, do the following:

1 Set the unit to the stand-by mode and turn the power on again.

2 If the unit is not restored in the previous operation, unplug and

plug in the unit, and then turn the power on.

Note:
If neither operation above restores the unit, clear all the memory by
resetting it.

■ Clearing all the memory (reset)

1 Press the ON/STAND-BY button to enter the power stand-by

mode.

2 While pressing down the ®ll button and the X-BASS/DEMO but­

ton, press the -«M PRESET v button until "CLEAR AL"

appears.

•II o

m i C O O -

Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD program.

33

Advertising
This manual is related to the following products: