Sharp CD-ES99 - Manual (Page 14)

CD-ES900
CD-ES99
General control
CLEAR
■ To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
■ Illumination light control
When the power is turned on, light illuminates around the display. To
turn on/off the light, hold down the CLEAR/DiMMER button on the
remote control more than 2 seconds.
■ Volume control
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase.
When it is turned counterclockwise, the
volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to in­
crease or decrease the volume.
■ Bass control
When the power is first turned on, the unit
will enter the extra bass mode which em­
phasizes the bass frequencies, and "X-
BASS" will appear. To cancel the extra
bass mode, press the X-BASS/DEMO (X-
BASS) button.
, /1 '
(0:::: 30 T M AX I MU vQ
( X-BASS)
—=^Er^
■ Equalizer
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat­
edly until the desired sound mode appears.
14
During CD/TUNER/TAPE mode
The sound is not
modified.
Bass and treble
are emphasized.
-►FLAT
I-
ROCK
4"
CLASSIC Trebie is cut a little.
4-
POPS
Bass and treble are
^ slightly emphasized.
VOCAL V o c a i s ( m i d r a n g e
tones) are emphasized.
_JAZZ Treble is slightly
emphasized.
During GAME/VIDEO mode
► FLAT sound is not
I modified.
ROCK Bass and treble
are emphasized.
CLASSIC Treble is cut a
^ little.
ACTION Bass is empha-
I sized.
SPORTS Vocals and treble
^ are emphasized.
__ racing treble are
emphasized more.