Various cd functions – Sharp CD-ES99 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CD-ES900

CD-ES99

• Playback will begin from track 1 on the DISC 1, After that disc fin­

ishes playing, the next disc will auiomaticaiiy play.

• After the last track on the fifth disc is played, the CD player stops

automatically.

• When there is no CD in one of the disc trays (1 - 5), the empty

tray will be skipped to the next tray with a CD.

To exchange other CDs while playing a disc:

Press one of the © 1 - © 5 buttons for the stopped disc and within 5
seconds, press the OPEN/CLOSE button and exchange discs.

To remove the CDs;

In the stop mode, press the © 1 - © 5 button and within 5 seconds,
press the OPEN/CLOSE button.

Caution:
• Do not place two CDs in one disc tray.

Do not play discs with special shapes (heart- or octagon­

shaped). It may cause malfunctions.

• Do not push the disc tray while it is moving.
• If the power fails while the tray is open, wait until the power is

restored.

• If the disc tray is stopped with force, "ER-CD20" will appear on

the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.

• If TV or radio interference occurs during CD operation, move the

unit away from the TV or radio.

• If a disc is damaged, dirty, or loaded upside down, the disc will be

skipped.

Auto power on function:
When you press any of the following buttons, the unit turns on.

• CD button (main unit and remote control): The unit turns on and

the "CD" function is activated.

button (main unit and remote control): The unit turns on

and playback of the last function starts (CD/TAPE/TUNER/
GAME).

Various CD functions

* •

Function

Play

Stop

Pause

Track up/
Track down

Fast for-

ward/Fast

reverse

Main unit

i

5

Remote

control

o

o

CD

/s.

MB-

CD

N/

CD

CD

N/

CD

Operation

Press in the stop
mode.

Press in the playback
mode.

Press in the playback
mode. Press the ► / w
button to resume play­
back from the paused
point.

Press in the playback

or stop mode,

if you press the button
in the stop mode,
press the ► / ^ button

to start the desired
track.

Press and hold down
in the playback mode.

Release the button to
resume playback.

Notes:
• Track up/track down and fast fonvard/fast reverse are possible

only within individual discs.

• When the end of the last track is reached during fast fon/vard,

END" will appear on the display and CD operation will be paused.

When the beginning of the first track is reached during fast re­
verse, the unit will enter the playback mode.

Last track number)

17

Advertising
This manual is related to the following products: