Sharp CD-ES99 - Manual (Page 22)

CD-ES900
CD-ES99
Listening to the radio (continued)
■ Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
■ To recall a memorized station
Press the PRESET (v or /\) button for less than 0.5 seconds to se­
lect the desired station.
1 Perform steps 1 - 3 In "Tuning" on page 21.
2 Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
H/l
I (
3 Within 30 seconds, press the PRESET (v or button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4 Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.
h/i
I I
if the "MEMORY" and preset number indicators go out before
the station is memorized, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a pre­
set station.
When a new station is stored in memory, the station previously
memorized will be erased.
■ To scan the preset stations
The stations saved in memory can be scanned automatioally. (Pre­
set memory scan)
Press the PRESET (v or.^) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
Press the PRESET (v- or/^) button again when the desired sta­
tion is located.
1
Note:
The backup function protects the memorized stations for a few hours
should there be a power failure or the AC power cord disconnection.
# 0
■ To erase entire preset memory
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 While pressing down the ®ll button and the X-BASS/DEMO but­
ton, press the CLOCK/TIMER button until "TUNER CL" appears.
•li o
cF
22