Cisco 5000 Series - Manual (Page 117)

S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m
B-5
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Appendix B Technical Specifications
Power Specifications
Power Supply LED Indicators
Table B-11 lists the LED indicators for the LED on the front of the power supply for the Cisco Nexus
5500 Platform switches and the Cisco Nexus 5000 Series switches.
PSU Control Interface I2 C
ROHS Compliant Yes
Size (W x H x D) 2.75 in. x 1.57 in. x 13.7 in.
Cubic Inches 59
Power Density 9.3 W per cubic inch
Operating Temperature 0 °C to 50 °C
Cooling Internal fans to cool the supply
Input connector AC connector in the chassis
Output connector DC output connector in the back
Hot plug capable Yes
Supply Indicators Supply Health: Green indicates the power supply is good
and Amber indicates a fault.
AC good indicator: Green indicates that AC is present
and is within the power supply specifications
RoHS Compliance Yes
Hot swappable Yes
Heat Dissipation 1536 BTU/hr
Table B-10 Specifications for the Cisco Nexus 5010 Power Supply (continued)
Description Specification
Table B-11 Power Supply LED Indicators
Condition Power LED Status (Green) Fail LED Status (Amber)
No AC power to the power supplies Off Off
Power supply failure (includes over
voltage, overcurrent, overtemperature,
and fan failure) Off On
Power supply warning events where
the power supply continues to operate
(high temperature, high power, and
slow fan) Off Blinking
AC present / 3.3 voltage standby
(VSB) on, and power supply unit off Blinking Off
Power supply On and OK On Off