Cisco 5000 Series - Manual (Page 88)

S e n d c o m m e n t s t o n 5 k d o c s @ c i s c o . c o m
3-24
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Chapter 3 Installing the Cisco Nexus 5500 Platform or 5000 Series Switch
Removing and Installing Components
Figure 3-11 Positioning the Module in the Cisco Nexus 5548 Chassis
Installing an Expansion Module in the Cisco Nexus 5000 Series Chassis
To install an expansion module in the Cisco Nexus5000 Series chassis, follow these steps:
Step 1 Grasp the handle of the module and place your other hand under the module to support it.
Step 2 Gently slide the module into the opening until you cannot push it any further.
Step 3 Tighten the captive screw on the front of the module.
Figure 3-11 shows the positioning of an expansion module in the Cisco Nexus 5020 chassis.
236714