Changing shooting function, Settings, P. 165 – Canon IXUS 230 HS User Manual
Page 165: Cop y
165
If you set the mode switch to
4, and the mode to G, you can change the
settings in the
4 tab (p. 45).
The lamp will automatically light to assist focusing in low light conditions when
you press the shutter button halfway. You can turn off the lamp.
z
Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
z
Choose [Flash Settings], then press the
m button.
z
Press the
op buttons to choose [Red-
Eye Lamp], then press the
qr buttons to
choose [Off].
Changing Shooting Function Settings
Before attempting to shoot using a function explained in this section in
modes other than
G, check if the function is available in those modes
Turning Off the AF Assist Beam
Turning Off the Red-Eye Reduction Function
COP
Y