Canon IXUS 230 HS - Manual (Page 69)

Adding Effects and Shooting
69
You can choose to retain a single color and change the rest to black and white
in a composition.
Choose T.
z Follow Steps 1 – 2 on p. 62 to choose T.
Press the p button.
X The unchanged image and the Color
Accent image will alternately display.
X The color for default settings is green.
Specify the color.
z Position the center frame so it is filled with
the color you want and press the
q button.
X The specified color will be recorded.
Specify the range of colors.
z Press the op buttons to change the
range of colors to be retained.
z Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
z Press the m button to complete the
setting and restore the shooting screen.
Shooting with Color Accent
Recorded color
• Using the flash may cause unexpected results in this mode.
• Depending on shooting conditions, the image may become coarse, or the
colors may not come out as expected.
COP
Y